Initialise mesh

src/freedombone-image-customise

@@ -87,40 +87,40 @@ WIFI_HOTSPOT='no'
 WIFI_NETWORKS_FILE=~/${PROJECT_NAME}-wifi.cfg
 
 enable_eatmydata_override() {
-    chroot $rootdir apt-get install --no-install-recommends -y eatmydata
-    if [ -x $rootdir/usr/bin/eatmydata ] && \
-           [ ! -f $rootdir/etc/apt/apt.conf.d/95debian-edu-install-dpkg-eatmydata ]; then
-        echo $"info: Adding apt config to call dpkg via eatmydata"
-        printf "#!/bin/sh\nexec eatmydata dpkg \"\$@\"\n" \
-               > $rootdir/var/tmp/dpkg-eatmydata
-        chmod 755 $rootdir/var/tmp/dpkg-eatmydata
-        cat > $rootdir/etc/apt/apt.conf.d/95debian-edu-install-dpkg-eatmydata <<EOF
+	chroot $rootdir apt-get install --no-install-recommends -y eatmydata
+	if [ -x $rootdir/usr/bin/eatmydata ] && \
+		   [ ! -f $rootdir/etc/apt/apt.conf.d/95debian-edu-install-dpkg-eatmydata ]; then
+		echo $"info: Adding apt config to call dpkg via eatmydata"
+		printf "#!/bin/sh\nexec eatmydata dpkg \"\$@\"\n" \
+			   > $rootdir/var/tmp/dpkg-eatmydata
+		chmod 755 $rootdir/var/tmp/dpkg-eatmydata
+		cat > $rootdir/etc/apt/apt.conf.d/95debian-edu-install-dpkg-eatmydata <<EOF
 Dir::Bin::dpkg "/var/tmp/dpkg-eatmydata";
 EOF
-    else
-        echo $"error: unable to find /usr/bin/eatmydata after installing the eatmydata package"
-    fi
+	else
+		echo $"error: unable to find /usr/bin/eatmydata after installing the eatmydata package"
+	fi
 }
 
 disable_eatmydata_override() {
-    for override in \
-        /etc/apt/apt.conf.d/95debian-edu-install-dpkg-eatmydata \
-            /var/tmp/dpkg-eatmydata ; do
-        echo $"info: Removing apt config to call dpkg via eatmydata"
-        if [ -f $rootdir$override ] ; then
-            rm -f $rootdir$override
-        else
-            echo $"warning: missing $rootdir$override"
-        fi
-    done
-    sync # Flush file buffers before continuing
+	for override in \
+		/etc/apt/apt.conf.d/95debian-edu-install-dpkg-eatmydata \
+			/var/tmp/dpkg-eatmydata ; do
+		echo $"info: Removing apt config to call dpkg via eatmydata"
+		if [ -f $rootdir$override ] ; then
+			rm -f $rootdir$override
+		else
+			echo $"warning: missing $rootdir$override"
+		fi
+	done
+	sync # Flush file buffers before continuing
 }
 
 set_apt_sources() {
-    NEW_MIRROR="$1"
-    COMPONENTS="main"
+	NEW_MIRROR="$1"
+	COMPONENTS="main"
 
-    cat <<EOF > etc/apt/sources.list
+	cat <<EOF > etc/apt/sources.list
 deb $NEW_MIRROR $SUITE $COMPONENTS
 deb-src $NEW_MIRROR $SUITE $COMPONENTS
 
@@ -130,12 +130,12 @@ EOF
 }
 
 configure_networking() {
-    if [[ $DEBIAN_INSTALL_ONLY != "no" ]]; then
-        return
-    fi
-    
-    if [[ $GENERIC_IMAGE == "no" ]]; then
-        echo "# This file describes the network interfaces available on your system
+	if [[ $DEBIAN_INSTALL_ONLY != "no" ]]; then
+		return
+	fi
+
+	if [[ $GENERIC_IMAGE == "no" ]]; then
+		echo "# This file describes the network interfaces available on your system
 # and how to activate them. For more information, see interfaces(5).
 
 # The loopback network interface
@@ -145,306 +145,306 @@ iface lo inet loopback
 # The primary network interface
 auto eth0
 iface eth0 inet static
-    address $BOX_IP_ADDRESS
-    netmask 255.255.255.0
-    gateway $ROUTER_IP_ADDRESS
-    dns-nameservers $NAMESERVER1 $NAMESERVER2
-        # Example to keep MAC address between reboots
-        #hwaddress ether B5:A2:BE:3F:1A:FE
-
-        # The secondary network interface
-        #auto eth1
-        #iface eth1 inet dhcp
-
-        # WiFi Example
-        #auto wlan0
-        #iface wlan0 inet dhcp
-        #    wpa-ssid \"essid\"
-        #    wpa-psk  \"password\"
-
-        # Ethernet/RNDIS gadget (g_ether)
-        # ... or on host side, usbnet and random hwaddr
-        # Note on some boards, usb0 is automaticly setup with an init script
-        #iface usb0 inet static
-        #    address 192.168.7.2
-        #    netmask 255.255.255.0
-        #    network 192.168.7.0
-        #    gateway 192.168.7.1" > $rootdir/etc/network/interfaces
-
-        hexarray=( 1 2 3 4 5 6 7 8 9 0 a b c d e f )
-        a=${hexarray[$RANDOM%16]}${hexarray[$RANDOM%16]}
-        b=${hexarray[$RANDOM%16]}${hexarray[$RANDOM%16]}
-        c=${hexarray[$RANDOM%16]}${hexarray[$RANDOM%16]}
-        d=${hexarray[$RANDOM%16]}${hexarray[$RANDOM%16]}
-        e=${hexarray[$RANDOM%16]}${hexarray[$RANDOM%16]}
-        sed -i "s|#hwaddress ether.*|hwaddress ether de:$a:$b:$c:$d:$e|g" \
-            $rootdir/etc/network/interfaces
-    fi
-
-    sed -i "s/nameserver.*/nameserver $NAMESERVER1/g" $rootdir/etc/resolv.conf
-    sed -i "/nameserver $NAMESERVER1/a\nameserver $NAMESERVER2" $rootdir/etc/resolv.conf
-
-    # change the motd to show further install instructions
-    echo $"
+	address $BOX_IP_ADDRESS
+	netmask 255.255.255.0
+	gateway $ROUTER_IP_ADDRESS
+	dns-nameservers $NAMESERVER1 $NAMESERVER2
+		# Example to keep MAC address between reboots
+		#hwaddress ether B5:A2:BE:3F:1A:FE
+
+		# The secondary network interface
+		#auto eth1
+		#iface eth1 inet dhcp
+
+		# WiFi Example
+		#auto wlan0
+		#iface wlan0 inet dhcp
+		#    wpa-ssid \"essid\"
+		#    wpa-psk  \"password\"
+
+		# Ethernet/RNDIS gadget (g_ether)
+		# ... or on host side, usbnet and random hwaddr
+		# Note on some boards, usb0 is automaticly setup with an init script
+		#iface usb0 inet static
+		#    address 192.168.7.2
+		#    netmask 255.255.255.0
+		#    network 192.168.7.0
+		#    gateway 192.168.7.1" > $rootdir/etc/network/interfaces
+
+		hexarray=( 1 2 3 4 5 6 7 8 9 0 a b c d e f )
+		a=${hexarray[$RANDOM%16]}${hexarray[$RANDOM%16]}
+		b=${hexarray[$RANDOM%16]}${hexarray[$RANDOM%16]}
+		c=${hexarray[$RANDOM%16]}${hexarray[$RANDOM%16]}
+		d=${hexarray[$RANDOM%16]}${hexarray[$RANDOM%16]}
+		e=${hexarray[$RANDOM%16]}${hexarray[$RANDOM%16]}
+		sed -i "s|#hwaddress ether.*|hwaddress ether de:$a:$b:$c:$d:$e|g" \
+			$rootdir/etc/network/interfaces
+	fi
+
+	sed -i "s/nameserver.*/nameserver $NAMESERVER1/g" $rootdir/etc/resolv.conf
+	sed -i "/nameserver $NAMESERVER1/a\nameserver $NAMESERVER2" $rootdir/etc/resolv.conf
+
+	# change the motd to show further install instructions
+	echo $"
  .---.                  .              .
  |                      |              |
  |--- .--. .-.  .-.  .-.|  .-. .--.--. |.-.  .-. .--.  .-.
  |    |   (.-' (.-' (   | (   )|  |  | |   )(   )|  | (.-'
  '    '     --'  --'  -' -  -' '  '   -' -'   -' '   -  --'
 
-                    Initial base install
+					Initial base install
 
 Your system is not yet installed. To complete the process run the
 following commands, then enter your details.
 
-    sudo su
-    ${PROJECT_NAME} menuconfig
+	sudo su
+	${PROJECT_NAME} menuconfig
 
 " > $rootdir/etc/motd
 }
 
 configure_ssh() {
-    sed -i "s/Port .*/Port ${SSH_PORT}/g" $rootdir/etc/ssh/sshd_config
-
-    if [[ "$SSH_PUBKEY" != "no" ]]; then
-        if [ ! -d $rootdir/home/$MY_USERNAME/.ssh ]; then
-            mkdir $rootdir/home/$MY_USERNAME/.ssh
-        fi
-        echo "$SSH_PUBKEY" > $rootdir/home/$MY_USERNAME/.ssh/authorized_keys
-        chroot $rootdir chown -R $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/.ssh
-        sed -i 's|PasswordAuthentication.*|PasswordAuthentication no|g' $rootdir/etc/ssh/sshd_config
-        echo $"Using ssh public key:"
-        echo $SSH_PUBKEY
-        echo $'Password ssh authentication turned off'
-    fi
+	sed -i "s/Port .*/Port ${SSH_PORT}/g" $rootdir/etc/ssh/sshd_config
+
+	if [[ "$SSH_PUBKEY" != "no" ]]; then
+		if [ ! -d $rootdir/home/$MY_USERNAME/.ssh ]; then
+			mkdir $rootdir/home/$MY_USERNAME/.ssh
+		fi
+		echo "$SSH_PUBKEY" > $rootdir/home/$MY_USERNAME/.ssh/authorized_keys
+		chroot $rootdir chown -R $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/.ssh
+		sed -i 's|PasswordAuthentication.*|PasswordAuthentication no|g' $rootdir/etc/ssh/sshd_config
+		echo $"Using ssh public key:"
+		echo $SSH_PUBKEY
+		echo $'Password ssh authentication turned off'
+	fi
 }
 
 admin_user_sudo() {
-    echo "$MY_USERNAME  ALL=(ALL) ALL" >> $rootdir/etc/sudoers
+	echo "$MY_USERNAME  ALL=(ALL) ALL" >> $rootdir/etc/sudoers
 }
 
 create_generic_image() {
-    if [[ $DEBIAN_INSTALL_ONLY != "no" ]]; then
-        return
-    fi  
-    if [[ $GENERIC_IMAGE == "no" ]]; then
-        return
-    fi
-    VARIANT="full"
-    if [ $CONFIG_FILENAME ]; then
-        if [[ "$CONFIG_FILENAME" == *"mesh.cfg"* ]]; then
-            VARIANT="mesh"
-        fi
-    fi
-
-    # Don't install any configuration. This will be a base system
-    if [[ $VARIANT != "mesh" ]]; then
-        CONFIG_FILENAME=
-    else
-        touch $rootdir/root/.initial_mesh_setup
-    fi
-
-    # The presence of this file indicates that the initial
-    # setup has not yet been completed
-    touch $rootdir/home/$MY_USERNAME/.initial_setup
-    chroot $rootdir chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/.initial_setup
-    touch $rootdir/root/.initial_setup
-
-    cat >> $rootdir/home/$MY_USERNAME/.bashrc <<EOF
+	if [[ $DEBIAN_INSTALL_ONLY != "no" ]]; then
+		return
+	fi
+	if [[ $GENERIC_IMAGE == "no" ]]; then
+		return
+	fi
+	VARIANT="full"
+	if [ $CONFIG_FILENAME ]; then
+		if [[ "$CONFIG_FILENAME" == *"mesh.cfg"* ]]; then
+			VARIANT="mesh"
+		fi
+	fi
+
+	# Don't install any configuration. This will be a base system
+	if [[ $VARIANT != "mesh" ]]; then
+		CONFIG_FILENAME=
+	else
+		touch $rootdir/root/.initial_mesh_setup
+	fi
+
+	# The presence of this file indicates that the initial
+	# setup has not yet been completed
+	touch $rootdir/home/$MY_USERNAME/.initial_setup
+	chroot $rootdir chown $MY_USERNAME:$MY_USERNAME /home/$MY_USERNAME/.initial_setup
+	touch $rootdir/root/.initial_setup
+
+	cat >> $rootdir/home/$MY_USERNAME/.bashrc <<EOF
 # initial setup of the system
 if [ -f ~/.initial_setup ]; then
-    clear
-    echo "
+	clear
+	echo "
  .---.                  .              .
  |                      |              |
  |--- .--. .-.  .-.  .-.|  .-. .--.--. |.-.  .-. .--.  .-.
  |    |   (.-' (.-' (   | (   )|  |  | |   )(   )|  | (.-'
  '    '     --'  --'  -' -  -' '  '   -' -'   -' '   -  --'
 
-                   Initial setup process
+				   Initial setup process
 
-          Please enter your password a second time.
+		  Please enter your password a second time.
 "
-    sudo su
+	sudo su
 fi
 EOF
 
-    echo '# initial setup of the system' >> $rootdir/root/.bashrc
-    echo 'if [ -f ~/.initial_setup ]; then' >> $rootdir/root/.bashrc
-    echo '    if [ -f ~/login.txt ]; then' >> $rootdir/root/.bashrc
-    echo '        NEW_USER_PASSWORD=$(printf `cat ~/login.txt`)' >> $rootdir/root/.bashrc
-    echo '    else' >> $rootdir/root/.bashrc
-    echo '        ENTROPY=$(cat /proc/sys/kernel/random/entropy_avail)' >> $rootdir/root/.bashrc
-    echo '        if [ $ENTROPY -lt 500 ]; then' >> $rootdir/root/.bashrc
-    ENTROPY_MESSAGE1=$'Initial setup process'
-    ENTROPY_MESSAGE2=$'Password Generation'
-    ENTROPY_MESSAGE3=$'WARNING: The entropy available on this system is too low to generate a password.\n\nThe installation process cannot continue.'
-    echo "            dialog --backtitle \"${ENTROPY_MESSAGE1}\" --title \"${ENTROPY_MESSAGE2}\" --msgbox \"${ENTROPY_MESSAGE3}\" 8 50" >> $rootdir/root/.bashrc
-    echo '            exit' >> $rootdir/root/.bashrc
-    echo '        fi' >> $rootdir/root/.bashrc
-    echo '        NEW_USER_PASSWORD="$(openssl rand -base64 12 | cut -c1-10)"' >> $rootdir/root/.bashrc
-    echo '    fi' >> $rootdir/root/.bashrc
-    echo '    echo "${NEW_USER_PASSWORD}" > ~/login.txt' >> $rootdir/root/.bashrc
-
-    echo '    clear' >> $rootdir/root/.bashrc
-    echo '    echo ""' >> $rootdir/root/.bashrc
-    NEW_LOGIN_PASSWORD_MESSAGE1=$'Your new login password is:'
-    NEW_LOGIN_PASSWORD_MESSAGE2=$'Use it whenever you wish to ssh into this system.'
-    NEW_LOGIN_PASSWORD_MESSAGE3=$'IMPORTANT: Please take a moment to enter the above password into a\npassword manager or write it down somewhere.'
-    PRESS_KEY_MESSAGE=$'Press any key to continue...'
-    echo "    echo \"${NEW_LOGIN_PASSWORD_MESSAGE1}\"" >> $rootdir/root/.bashrc
-    echo '    echo ""' >> $rootdir/root/.bashrc
-    echo '    toilet "${NEW_USER_PASSWORD}"' >> $rootdir/root/.bashrc
-    echo '    echo ""' >> $rootdir/root/.bashrc
-    echo '    echo "                          ${NEW_USER_PASSWORD}"' >> $rootdir/root/.bashrc
-    echo '    echo ""' >> $rootdir/root/.bashrc
-    echo "    echo \"${NEW_LOGIN_PASSWORD_MESSAGE2}\"" >> $rootdir/root/.bashrc
-    echo '    echo ""' >> $rootdir/root/.bashrc
-    echo "    echo \"${NEW_LOGIN_PASSWORD_MESSAGE3}\"" >> $rootdir/root/.bashrc
-    echo '    echo ""' >> $rootdir/root/.bashrc
-    echo "    read -n1 -r -p \"${PRESS_KEY_MESSAGE}\" key" >> $rootdir/root/.bashrc
-
-    # change the password for the admin user
-    echo -n "    echo \"${MY_USERNAME}:" >> $rootdir/root/.bashrc
-    echo '$(printf `cat ~/login.txt`)"|chpasswd' >> $rootdir/root/.bashrc
-
-    # update before continuing
-    echo "    cd /root/${PROJECT_NAME}" >> $rootdir/root/.bashrc
-    echo "    git stash" >> $rootdir/root/.bashrc
-    echo "    git pull" >> $rootdir/root/.bashrc
-    echo "    make install" >> $rootdir/root/.bashrc
-
-    if [[ $VARIANT != "mesh" ]]; then
-        if [[ $ONION_ONLY == "no" ]]; then
-            if [[ $MINIMAL_INSTALL == "no" ]]; then
-                echo "    ${PROJECT_NAME} menuconfig-full" >> $rootdir/root/.bashrc
-            else
-                echo "    ${PROJECT_NAME} menuconfig" >> $rootdir/root/.bashrc
-            fi
-        else
-            echo "    ${PROJECT_NAME} menuconfig-onion" >> $rootdir/root/.bashrc
-        fi
-    else
-        echo "    echo ''" >> $rootdir/root/.bashrc
-    fi
-    echo '    if [ "$?" = "0" ]; then' >> $rootdir/root/.bashrc
-    echo "        if [ -f ~/${PROJECT_NAME}-completed.txt ]; then" >> $rootdir/root/.bashrc
-    # Remove the initial setup files
-    echo '            rm /root/.initial_setup' >> $rootdir/root/.bashrc
-    echo "            rm /home/${MY_USERNAME}/.initial_setup" >> $rootdir/root/.bashrc
-    echo "            touch /root/.remove_${GENERIC_IMAGE_USERNAME}" >> $rootdir/root/.bashrc
-    echo '            shred -zu ~/login.txt' >> $rootdir/root/.bashrc
-    END_MESSAGE1=$'Congratulations!'
-    if [[ $VARIANT != "mesh" ]]; then
-        END_MESSAGE2=$'\nYour system has now installed\n\nThe onion ssh service is at $SSH_ONION_HOSTNAME\n\nPress any key to reboot and begin using it'
-        echo '            SSH_ONION_HOSTNAME=$(cat /var/lib/tor/hidden_service_ssh/hostname)' >> $rootdir/root/.bashrc
-    else
-        END_MESSAGE2=$'\nYour system has now installed\n\nPress any key to reboot and begin using it'
-    fi
-    echo "            dialog --title '$END_MESSAGE1' --msgbox \"$END_MESSAGE2\" 9 50" >> $rootdir/root/.bashrc
-    echo '            reboot' >> $rootdir/root/.bashrc
-    echo '        fi' >> $rootdir/root/.bashrc
-    echo '    else' >> $rootdir/root/.bashrc
-    echo '        key=' >> $rootdir/root/.bashrc
-    echo '        while [[ $key != "x" ]]; do' >> $rootdir/root/.bashrc
-    INSTALL_FAIL_MESSAGE=$"Install failed. Press x to continue..."
-    echo "            read -n1 -r -p \"${INSTALL_FAIL_MESSAGE}\" key" >> $rootdir/root/.bashrc
-    echo '        done' >> $rootdir/root/.bashrc
-    echo '    fi' >> $rootdir/root/.bashrc
-    echo '    exit' >> $rootdir/root/.bashrc
-    echo 'else' >> $rootdir/root/.bashrc
-    echo '    # Remove default account after install' >> $rootdir/root/.bashrc
-    echo "    if [ -f /root/.remove_${GENERIC_IMAGE_USERNAME} ]; then" >> $rootdir/root/.bashrc
-    echo "        if [ -d /home/${GENERIC_IMAGE_USERNAME} ]; then" >> $rootdir/root/.bashrc
-    echo "           userdel -r ${GENERIC_IMAGE_USERNAME}" >> $rootdir/root/.bashrc
-    echo "           if [ -d /home/${GENERIC_IMAGE_USERNAME} ]; then" >> $rootdir/root/.bashrc
-    echo "               rm -rf /home/${GENERIC_IMAGE_USERNAME}" >> $rootdir/root/.bashrc
-    echo "               rm /root/.remove_${GENERIC_IMAGE_USERNAME}" >> $rootdir/root/.bashrc
-    echo '           fi' >> $rootdir/root/.bashrc
-    echo '        fi' >> $rootdir/root/.bashrc
-    echo '    fi' >> $rootdir/root/.bashrc
-    echo 'fi' >> $rootdir/root/.bashrc
+	echo '# initial setup of the system' >> $rootdir/root/.bashrc
+	echo 'if [ -f ~/.initial_setup ]; then' >> $rootdir/root/.bashrc
+	echo '    if [ -f ~/login.txt ]; then' >> $rootdir/root/.bashrc
+	echo '        NEW_USER_PASSWORD=$(printf `cat ~/login.txt`)' >> $rootdir/root/.bashrc
+	echo '    else' >> $rootdir/root/.bashrc
+	echo '        ENTROPY=$(cat /proc/sys/kernel/random/entropy_avail)' >> $rootdir/root/.bashrc
+	echo '        if [ $ENTROPY -lt 500 ]; then' >> $rootdir/root/.bashrc
+	ENTROPY_MESSAGE1=$'Initial setup process'
+	ENTROPY_MESSAGE2=$'Password Generation'
+	ENTROPY_MESSAGE3=$'WARNING: The entropy available on this system is too low to generate a password.\n\nThe installation process cannot continue.'
+	echo "            dialog --backtitle \"${ENTROPY_MESSAGE1}\" --title \"${ENTROPY_MESSAGE2}\" --msgbox \"${ENTROPY_MESSAGE3}\" 8 50" >> $rootdir/root/.bashrc
+	echo '            exit' >> $rootdir/root/.bashrc
+	echo '        fi' >> $rootdir/root/.bashrc
+	echo '        NEW_USER_PASSWORD="$(openssl rand -base64 12 | cut -c1-10)"' >> $rootdir/root/.bashrc
+	echo '    fi' >> $rootdir/root/.bashrc
+	echo '    echo "${NEW_USER_PASSWORD}" > ~/login.txt' >> $rootdir/root/.bashrc
+
+	echo '    clear' >> $rootdir/root/.bashrc
+	echo '    echo ""' >> $rootdir/root/.bashrc
+	NEW_LOGIN_PASSWORD_MESSAGE1=$'Your new login password is:'
+	NEW_LOGIN_PASSWORD_MESSAGE2=$'Use it whenever you wish to ssh into this system.'
+	NEW_LOGIN_PASSWORD_MESSAGE3=$'IMPORTANT: Please take a moment to enter the above password into a\npassword manager or write it down somewhere.'
+	PRESS_KEY_MESSAGE=$'Press any key to continue...'
+	echo "    echo \"${NEW_LOGIN_PASSWORD_MESSAGE1}\"" >> $rootdir/root/.bashrc
+	echo '    echo ""' >> $rootdir/root/.bashrc
+	echo '    toilet "${NEW_USER_PASSWORD}"' >> $rootdir/root/.bashrc
+	echo '    echo ""' >> $rootdir/root/.bashrc
+	echo '    echo "                          ${NEW_USER_PASSWORD}"' >> $rootdir/root/.bashrc
+	echo '    echo ""' >> $rootdir/root/.bashrc
+	echo "    echo \"${NEW_LOGIN_PASSWORD_MESSAGE2}\"" >> $rootdir/root/.bashrc
+	echo '    echo ""' >> $rootdir/root/.bashrc
+	echo "    echo \"${NEW_LOGIN_PASSWORD_MESSAGE3}\"" >> $rootdir/root/.bashrc
+	echo '    echo ""' >> $rootdir/root/.bashrc
+	echo "    read -n1 -r -p \"${PRESS_KEY_MESSAGE}\" key" >> $rootdir/root/.bashrc
+
+	# change the password for the admin user
+	echo -n "    echo \"${MY_USERNAME}:" >> $rootdir/root/.bashrc
+	echo '$(printf `cat ~/login.txt`)"|chpasswd' >> $rootdir/root/.bashrc
+
+	# update before continuing
+	echo "    cd /root/${PROJECT_NAME}" >> $rootdir/root/.bashrc
+	echo "    git stash" >> $rootdir/root/.bashrc
+	echo "    git pull" >> $rootdir/root/.bashrc
+	echo "    make install" >> $rootdir/root/.bashrc
+
+	if [[ $VARIANT != "mesh" ]]; then
+		if [[ $ONION_ONLY == "no" ]]; then
+			if [[ $MINIMAL_INSTALL == "no" ]]; then
+				echo "    ${PROJECT_NAME} menuconfig-full" >> $rootdir/root/.bashrc
+			else
+				echo "    ${PROJECT_NAME} menuconfig" >> $rootdir/root/.bashrc
+			fi
+		else
+			echo "    ${PROJECT_NAME} menuconfig-onion" >> $rootdir/root/.bashrc
+		fi
+	else
+		echo "    echo ''" >> $rootdir/root/.bashrc
+	fi
+	echo '    if [ "$?" = "0" ]; then' >> $rootdir/root/.bashrc
+	echo "        if [ -f ~/${PROJECT_NAME}-completed.txt ]; then" >> $rootdir/root/.bashrc
+	# Remove the initial setup files
+	echo '            rm /root/.initial_setup' >> $rootdir/root/.bashrc
+	echo "            rm /home/${MY_USERNAME}/.initial_setup" >> $rootdir/root/.bashrc
+	echo "            touch /root/.remove_${GENERIC_IMAGE_USERNAME}" >> $rootdir/root/.bashrc
+	echo '            shred -zu ~/login.txt' >> $rootdir/root/.bashrc
+	END_MESSAGE1=$'Congratulations!'
+	if [[ $VARIANT != "mesh" ]]; then
+		END_MESSAGE2=$'\nYour system has now installed\n\nThe onion ssh service is at $SSH_ONION_HOSTNAME\n\nPress any key to reboot and begin using it'
+		echo '            SSH_ONION_HOSTNAME=$(cat /var/lib/tor/hidden_service_ssh/hostname)' >> $rootdir/root/.bashrc
+	else
+		END_MESSAGE2=$'\nYour system has now installed\n\nPress any key to reboot and begin using it'
+	fi
+	echo "            dialog --title '$END_MESSAGE1' --msgbox \"$END_MESSAGE2\" 9 50" >> $rootdir/root/.bashrc
+	echo '            reboot' >> $rootdir/root/.bashrc
+	echo '        fi' >> $rootdir/root/.bashrc
+	echo '    else' >> $rootdir/root/.bashrc
+	echo '        key=' >> $rootdir/root/.bashrc
+	echo '        while [[ $key != "x" ]]; do' >> $rootdir/root/.bashrc
+	INSTALL_FAIL_MESSAGE=$"Install failed. Press x to continue..."
+	echo "            read -n1 -r -p \"${INSTALL_FAIL_MESSAGE}\" key" >> $rootdir/root/.bashrc
+	echo '        done' >> $rootdir/root/.bashrc
+	echo '    fi' >> $rootdir/root/.bashrc
+	echo '    exit' >> $rootdir/root/.bashrc
+	echo 'else' >> $rootdir/root/.bashrc
+	echo '    # Remove default account after install' >> $rootdir/root/.bashrc
+	echo "    if [ -f /root/.remove_${GENERIC_IMAGE_USERNAME} ]; then" >> $rootdir/root/.bashrc
+	echo "        if [ -d /home/${GENERIC_IMAGE_USERNAME} ]; then" >> $rootdir/root/.bashrc
+	echo "           userdel -r ${GENERIC_IMAGE_USERNAME}" >> $rootdir/root/.bashrc
+	echo "           if [ -d /home/${GENERIC_IMAGE_USERNAME} ]; then" >> $rootdir/root/.bashrc
+	echo "               rm -rf /home/${GENERIC_IMAGE_USERNAME}" >> $rootdir/root/.bashrc
+	echo "               rm /root/.remove_${GENERIC_IMAGE_USERNAME}" >> $rootdir/root/.bashrc
+	echo '           fi' >> $rootdir/root/.bashrc
+	echo '        fi' >> $rootdir/root/.bashrc
+	echo '    fi' >> $rootdir/root/.bashrc
+	echo 'fi' >> $rootdir/root/.bashrc
 }
 
 continue_installation() {
-    # If a configuration file exists then run with it
-    # otherwise the interactive installer can be used
-    # This is equivalent to installing freedombox-setup on freedombox
-    if [ $CONFIG_FILENAME ]; then
-        if [ ${#CONFIG_FILENAME} -gt 2 ]; then
-            cp $CONFIG_FILENAME $rootdir/root/$PROJECT_NAME.cfg
-            cat $rootdir/root/$PROJECT_NAME.cfg
-            chroot "$rootdir" su -c "$PROJECT_NAME -c /root/$PROJECT_NAME.cfg" - root
-        fi
-    fi
+	# If a configuration file exists then run with it
+	# otherwise the interactive installer can be used
+	# This is equivalent to installing freedombox-setup on freedombox
+	if [ $CONFIG_FILENAME ]; then
+		if [ ${#CONFIG_FILENAME} -gt 2 ]; then
+			cp $CONFIG_FILENAME $rootdir/root/$PROJECT_NAME.cfg
+			cat $rootdir/root/$PROJECT_NAME.cfg
+			chroot "$rootdir" su -c "$PROJECT_NAME -c /root/$PROJECT_NAME.cfg" - root
+		fi
+	fi
 }
 
 atheros_wifi() {
-    firmware_filename="open-ath9k-htc-firmware_1.3-1_all.deb"
-    firmware_hash='5fea58ffefdf0ef15b504db7fbe3bc078c03e0d927bba64085e4b6f2546102f5'
-
-    firmware_url="http://us.archive.trisquel.info/trisquel/pool/main/o/open-ath9k-htc-firmware/$firmware_filename"
-    firmware_tempfile="/tmp/$firmware_filename"
-    wget "$firmware_url" -O "$rootdir$firmware_tempfile"
-    downloaded_firmware_hash=$(sha256sum "$rootdir$firmware_tempfile" | awk -F ' ' '{print $1}')
-    if [[ "$downloaded_firmware_hash" == "$firmware_hash" ]]; then
-        chroot "$rootdir" dpkg -i "$firmware_tempfile"
-    else
-        echo 'WARNING: Atheros Wifi firmware hash does not match. The driver has not been installed.'
-    fi
+	firmware_filename="open-ath9k-htc-firmware_1.3-1_all.deb"
+	firmware_hash='5fea58ffefdf0ef15b504db7fbe3bc078c03e0d927bba64085e4b6f2546102f5'
+
+	firmware_url="http://us.archive.trisquel.info/trisquel/pool/main/o/open-ath9k-htc-firmware/$firmware_filename"
+	firmware_tempfile="/tmp/$firmware_filename"
+	wget "$firmware_url" -O "$rootdir$firmware_tempfile"
+	downloaded_firmware_hash=$(sha256sum "$rootdir$firmware_tempfile" | awk -F ' ' '{print $1}')
+	if [[ "$downloaded_firmware_hash" == "$firmware_hash" ]]; then
+		chroot "$rootdir" dpkg -i "$firmware_tempfile"
+	else
+		echo 'WARNING: Atheros Wifi firmware hash does not match. The driver has not been installed.'
+	fi
 }
 
 
 initialise_mesh() {
-    if [[ $VARIANT != "mesh" || $DEBIAN_INSTALL_ONLY != "no" ]]; then
-        return
-    fi
-    freedombone-mesh-install -f firewall -r "${rootdir}"
-    freedombone-mesh-install -f avahi -r "${rootdir}"
-    freedombone-mesh-install -f batman -r "${rootdir}"
-    freedombone-mesh-install -f tox_node -r "${rootdir}"
-    freedombone-mesh-install -f tox_client -r "${rootdir}"
-    freedombone-mesh-install -f zeronet -r "${rootdir}"
-
-    MESH_SERVICE='mesh-setup.service'
-    MESH_SETUP_DAEMON=$rootdir/etc/systemd/system/$MESH_SERVICE
-
-    echo '[Unit]' > $MESH_SETUP_DAEMON
-    echo 'Description=Initial mesh router configuration' >> $MESH_SETUP_DAEMON
-    echo 'After=syslog.target' >> $MESH_SETUP_DAEMON
-    echo 'After=network.target' >> $MESH_SETUP_DAEMON
-    echo '[Service]' >> $MESH_SETUP_DAEMON
-    echo 'Type=simple' >> $MESH_SETUP_DAEMON
-    echo 'User=root' >> $MESH_SETUP_DAEMON
-    echo 'Group=root' >> $MESH_SETUP_DAEMON
-    echo 'WorkingDirectory=/root' >> $MESH_SETUP_DAEMON
-    echo "ExecStart=/usr/local/bin/${PROJECT_NAME}-image-mesh > /var/log/mesh-setup.log" >> $MESH_SETUP_DAEMON
-    echo '' >> $MESH_SETUP_DAEMON
-    echo 'TimeoutSec=99999' >> $MESH_SETUP_DAEMON
-    echo '' >> $MESH_SETUP_DAEMON
-    echo '[Install]' >> $MESH_SETUP_DAEMON
-    echo 'WantedBy=multi-user.target' >> $MESH_SETUP_DAEMON
-    chroot "$rootdir" systemctl enable $MESH_SERVICE
+	if [[ $VARIANT != "mesh" || $DEBIAN_INSTALL_ONLY != "no" ]]; then
+		return
+	fi
+	chroot "$rootdir" freedombone-mesh-install -f firewall
+	chroot "$rootdir" freedombone-mesh-install -f avahi
+	chroot "$rootdir" freedombone-mesh-install -f batman
+	chroot "$rootdir" freedombone-mesh-install -f tox_node
+	chroot "$rootdir" freedombone-mesh-install -f tox_client
+	chroot "$rootdir" freedombone-mesh-install -f zeronet
+
+	MESH_SERVICE='mesh-setup.service'
+	MESH_SETUP_DAEMON=$rootdir/etc/systemd/system/$MESH_SERVICE
+
+	echo '[Unit]' > $MESH_SETUP_DAEMON
+	echo 'Description=Initial mesh router configuration' >> $MESH_SETUP_DAEMON
+	echo 'After=syslog.target' >> $MESH_SETUP_DAEMON
+	echo 'After=network.target' >> $MESH_SETUP_DAEMON
+	echo '[Service]' >> $MESH_SETUP_DAEMON
+	echo 'Type=simple' >> $MESH_SETUP_DAEMON
+	echo 'User=root' >> $MESH_SETUP_DAEMON
+	echo 'Group=root' >> $MESH_SETUP_DAEMON
+	echo 'WorkingDirectory=/root' >> $MESH_SETUP_DAEMON
+	echo "ExecStart=/usr/local/bin/${PROJECT_NAME}-image-mesh > /var/log/mesh-setup.log" >> $MESH_SETUP_DAEMON
+	echo '' >> $MESH_SETUP_DAEMON
+	echo 'TimeoutSec=99999' >> $MESH_SETUP_DAEMON
+	echo '' >> $MESH_SETUP_DAEMON
+	echo '[Install]' >> $MESH_SETUP_DAEMON
+	echo 'WantedBy=multi-user.target' >> $MESH_SETUP_DAEMON
+	chroot "$rootdir" systemctl enable $MESH_SERVICE
 }
 
 configure_wifi() {
-    if [[ $VARIANT == "mesh" ]]; then
-        return
-    fi
-
-    if [ -f $WIFI_NETWORKS_FILE ]; then
-        chroot "$rootdir" ${PROJECT_NAME}-wifi -i $WIFI_INTERFACE --networks $WIFI_NETWORKS_FILE
-        return
-    fi
-    
-    if [[ $WIFI_TYPE != 'none' ]]; then
-        if [ ${#WIFI_PASSPHRASE} -lt 2 ]; then
-            return
-        fi  
-        chroot "$rootdir" ${PROJECT_NAME}-wifi -i $WIFI_INTERFACE -s $WIFI_SSID -t $WIFI_TYPE -p $WIFI_PASSPHRASE --hotspot $WIFI_HOTSPOT
-    else
-        chroot "$rootdir" ${PROJECT_NAME}-wifi -i $WIFI_INTERFACE -s $WIFI_SSID -t $WIFI_TYPE --hotspot $WIFI_HOTSPOT
-    fi
+	if [[ $VARIANT == "mesh" ]]; then
+		return
+	fi
+
+	if [ -f $WIFI_NETWORKS_FILE ]; then
+		chroot "$rootdir" ${PROJECT_NAME}-wifi -i $WIFI_INTERFACE --networks $WIFI_NETWORKS_FILE
+		return
+	fi
+
+	if [[ $WIFI_TYPE != 'none' ]]; then
+		if [ ${#WIFI_PASSPHRASE} -lt 2 ]; then
+			return
+		fi
+		chroot "$rootdir" ${PROJECT_NAME}-wifi -i $WIFI_INTERFACE -s $WIFI_SSID -t $WIFI_TYPE -p $WIFI_PASSPHRASE --hotspot $WIFI_HOTSPOT
+	else
+		chroot "$rootdir" ${PROJECT_NAME}-wifi -i $WIFI_INTERFACE -s $WIFI_SSID -t $WIFI_TYPE --hotspot $WIFI_HOTSPOT
+	fi
 }
 
 # Set to true/false to control if eatmydata is used during build
@@ -472,16 +472,16 @@ echo $username:$password | chroot $rootdir /usr/sbin/chpasswd
 chroot "$rootdir" adduser $username sudo
 
 case "$MACHINE" in
-    virtualbox)
-        # hide irrelevant console keyboard messages.
-        echo "echo \"4 4 1 7\" > /proc/sys/kernel/printk" \
-             >> /etc/init.d/rc.local
-        ;;
-    qemu)
-        # hide irrelevant console keyboard messages.
-        echo "echo \"4 4 1 7\" > /proc/sys/kernel/printk" \
-             >> /etc/init.d/rc.local
-        ;;
+	virtualbox)
+		# hide irrelevant console keyboard messages.
+		echo "echo \"4 4 1 7\" > /proc/sys/kernel/printk" \
+			 >> /etc/init.d/rc.local
+		;;
+	qemu)
+		# hide irrelevant console keyboard messages.
+		echo "echo \"4 4 1 7\" > /proc/sys/kernel/printk" \
+			 >> /etc/init.d/rc.local
+		;;
 esac
 
 set_apt_sources $BUILD_MIRROR
@@ -497,13 +497,13 @@ EOF
 chmod a+rx $rootdir/usr/sbin/policy-rc.d
 
 if $use_eatmydata ; then
-    enable_eatmydata_override
+	enable_eatmydata_override
 fi
 
 if [ -n "$CUSTOM_SETUP" ]; then
-    cp "$CUSTOM_SETUP" "$rootdir"/tmp
-    chroot "$rootdir" apt-get install -y gdebi-core
-    chroot "$rootdir" gdebi -n /tmp/"$(basename $CUSTOM_SETUP)"
+	cp "$CUSTOM_SETUP" "$rootdir"/tmp
+	chroot "$rootdir" apt-get install -y gdebi-core
+	chroot "$rootdir" gdebi -n /tmp/"$(basename $CUSTOM_SETUP)"
 fi
 
 chroot "$rootdir" apt-get install -y sudo git dialog toilet build-essential openssh-server
@@ -521,39 +521,39 @@ make install
 EOF
 
 chroot "$rootdir" ${PROJECT_NAME}-image-hardware-setup 2>&1 | \
-    tee $rootdir/var/log/${PROJECT_NAME}-image-hardware-setup.log
+	tee $rootdir/var/log/${PROJECT_NAME}-image-hardware-setup.log
 
 rm $rootdir/usr/sbin/policy-rc.d
 
 # Set up HRNG for systems known to have one
 # Otherwise install haveged
 if [[ "$MACHINE" != "beaglebone" ]]; then
-    chroot $rootdir apt-get -y install haveged
+	chroot $rootdir apt-get -y install haveged
 else
-    chroot $rootdir apt-get -y install rng-tools
-    sed -i 's|#HRNGDEVICE=/dev/hwrng|HRNGDEVICE=/dev/hwrng|g' $rootdir/etc/default/rng-tools
+	chroot $rootdir apt-get -y install rng-tools
+	sed -i 's|#HRNGDEVICE=/dev/hwrng|HRNGDEVICE=/dev/hwrng|g' $rootdir/etc/default/rng-tools
 fi
 
 # copy u-boot to beginning of image
 case "$MACHINE" in
-    beaglebone)
-        dd if=$rootdir/usr/lib/u-boot/am335x_boneblack/MLO of="$image" \
-           count=1 seek=1 conv=notrunc bs=128k
-        dd if=$rootdir/usr/lib/u-boot/am335x_boneblack/u-boot.img of="$image" \
-           count=2 seek=1 conv=notrunc bs=384k
-        ;;
-    cubieboard2)
-        dd if=$rootdir/usr/lib/u-boot/Cubieboard2/u-boot-sunxi-with-spl.bin of="$image" \
-           seek=8 conv=notrunc bs=1k
-        ;;
-    a20-olinuxino-lime)
-        dd if=$rootdir/usr/lib/u-boot/A20-OLinuXino-Lime/u-boot-sunxi-with-spl.bin \
-           of="$image" seek=8 conv=notrunc bs=1k
-        ;;
+	beaglebone)
+		dd if=$rootdir/usr/lib/u-boot/am335x_boneblack/MLO of="$image" \
+		   count=1 seek=1 conv=notrunc bs=128k
+		dd if=$rootdir/usr/lib/u-boot/am335x_boneblack/u-boot.img of="$image" \
+		   count=2 seek=1 conv=notrunc bs=384k
+		;;
+	cubieboard2)
+		dd if=$rootdir/usr/lib/u-boot/Cubieboard2/u-boot-sunxi-with-spl.bin of="$image" \
+		   seek=8 conv=notrunc bs=1k
+		;;
+	a20-olinuxino-lime)
+		dd if=$rootdir/usr/lib/u-boot/A20-OLinuXino-Lime/u-boot-sunxi-with-spl.bin \
+		   of="$image" seek=8 conv=notrunc bs=1k
+		;;
 esac
 
 if $use_eatmydata ; then
-    disable_eatmydata_override
+	disable_eatmydata_override
 fi
 
 set_apt_sources $MIRROR