ipv6 can be used

src/freedombone-tests

     output "V-38544" $? ${SETLANG}
     ################
 
-    ##RHEL-06-000098
-    ##The IPv6 protocol handler must not be bound to the network stack unless needed.
-
-    bash $STIG_TESTS_DIR/check-ipv6-enable.sh >/dev/null 2>&1 &
-
-    stig_spinner $!
-    output "V-38546" $? ${SETLANG}
-    ################
-
     ##RHEL-06-000099
     ##The system must ignore ICMPv6 redirects by default.
     ##If IPv6 is disabled, this is not applicable.

src/freedombone-utils-firewall

         sed -i "s|#net.ipv4.conf.default.accept_source_route.*|net.ipv4.conf.default.accept_source_route = 0|g" /etc/sysctl.conf
         sed -i "s|net.ipv4.conf.default.accept_source_route.*|net.ipv4.conf.default.accept_source_route = 0|g" /etc/sysctl.conf
     fi
+    if ! grep -q "net.ipv4.conf.default.secure_redirects" /etc/sysctl.conf; then
+        echo "net.ipv4.conf.default.secure_redirects = 0" >> /etc/sysctl.conf
+    else
+        sed -i "s|#net.ipv4.conf.default.secure_redirects.*|net.ipv4.conf.default.secure_redirects = 0|g" /etc/sysctl.conf
+        sed -i "s|net.ipv4.conf.default.secure_redirects.*|net.ipv4.conf.default.secure_redirects = 0|g" /etc/sysctl.conf
+    fi
+    net.ipv4.conf.default.accept_redirects = 0
+    if ! grep -q "net.ipv4.conf.default.accept_redirects" /etc/sysctl.conf; then
+        echo "net.ipv4.conf.default.accept_redirects = 0" >> /etc/sysctl.conf
+    else
+        sed -i "s|#net.ipv4.conf.default.accept_redirects.*|net.ipv4.conf.default.accept_redirects = 0|g" /etc/sysctl.conf
+        sed -i "s|net.ipv4.conf.default.accept_redirects.*|net.ipv4.conf.default.accept_redirects = 0|g" /etc/sysctl.conf
+    fi
     mark_completed $FUNCNAME
 }