hotspot

src/freedombone-controlpanel

 WIFI_SSID=
 WIFI_TYPE='wpa2-psk'
 WIFI_PASSPHRASE=
+WIFI_HOTSPOT='no'
 
 USB_DRIVE=sdb
 # get default USB from config file
 CONFIGURATION_FILE=/root/${PROJECT_NAME}.cfg
 if [ -f $CONFIGURATION_FILE ]; then
+    if grep -q "WIFI_HOTSPOT=" $CONFIGURATION_FILE; then
+        WIFI_HOTSPOT=$(cat $CONFIGURATION_FILE | grep "WIFI_HOTSPOT=" | awk -F '=' '{print $2}')
+    fi
     if grep -q "WIFI_INTERFACE=" $CONFIGURATION_FILE; then
         WIFI_INTERFACE=$(cat $CONFIGURATION_FILE | grep "WIFI_INTERFACE=" | awk -F '=' '{print $2}')
     fi
 }
 
 function wifi_settings {
+    PREV_WIFI_HOTSPOT=$WIFI_HOTSPOT
     PREV_WIFI_INTERFACE=$WIFI_INTERFACE
     PREV_WIFI_SSID=$WIFI_SSID
     PREV_WIFI_TYPE=$WIFI_TYPE
     trap "rm -f $data" 0 1 2 5 15
     dialog --backtitle $"Freedombone Control Panel" \
            --title $"Wifi Settings" \
-           --form $"\nIf you wish to use wifi rather than wired ethernet then enter the details below, otherwise just select Ok:" 15 55 5 \
+           --form $"\nIf you wish to use wifi rather than wired ethernet then enter the details below, otherwise just select Ok:" 16 55 6 \
            $"Interface:" 1 1 "$WIFI_INTERFACE" 1 16 16 15 \
            $"SSID:" 2 1 "$WIFI_SSID" 2 16 30 30 \
            $"Type:" 3 1 "$WIFI_TYPE" 3 16 16 15 \
            $"Passphrase:" 4 1 "$WIFI_PASSPHRASE" 4 16 30 30 \
+           $"Hotspot:" 5 1 "$WIFI_HOTSPOT" 5 16 16 15 \
            2> $data
     sel=$?
     case $sel in
     NEW_WIFI_SSID=$(cat $data | sed -n 2p)
     NEW_WIFI_TYPE=$(cat $data | sed -n 3p)
     NEW_WIFI_PASSPHRASE=$(cat $data | sed -n 4p)
+    NEW_WIFI_HOTSPOT=$(cat $data | sed -n 5p)
 
     if [[ $NEW_WIFI_TYPE != 'none' && $NEW_WIFI_TYPE != 'wpa2-psk' ]]; then
         return
         fi
         if [ ${#NEW_WIFI_PASSPHRASE} -lt 2 ]; then
             return
-        fi  
-        ${PROJECT_NAME}-wifi -i $NEW_WIFI_INTERFACE -s $NEW_WIFI_SSID -t $NEW_WIFI_TYPE -p $NEW_WIFI_PASSPHRASE
+        fi
+
+        HOTSPOT='no'
+        if [[ $NEW_WIFI_HOTSPOT == $'Y' || $NEW_WIFI_HOTSPOT == $'yes' || $NEW_WIFI_HOTSPOT == $'y' ]]; then
+            apt-get -y install hostapd bridge-utils
+            HOTSPOT='yes'
+        fi
+        
+        ${PROJECT_NAME}-wifi -i $NEW_WIFI_INTERFACE -s $NEW_WIFI_SSID -t $NEW_WIFI_TYPE -p $NEW_WIFI_PASSPHRASE --hotspot $HOTSPOT
     else
-        ${PROJECT_NAME}-wifi -i $NEW_WIFI_INTERFACE -s $NEW_WIFI_SSID -t $NEW_WIFI_TYPE     
+        ${PROJECT_NAME}-wifi -i $NEW_WIFI_INTERFACE -s $NEW_WIFI_SSID -t $NEW_WIFI_TYPE --hotspot $HOTSPOT
     fi
 
     if [[ $PREV_WIFI_INTERFACE != $NEW_WIFI_INTERFACE || $PREV_WIFI_SSID != $NEW_WIFI_SSID || $PREV_WIFI_TYPE != $NEW_WIFI_TYPE || $PREV_WIFI_PASSPHRASE != $NEW_WIFI_PASSPHRASE ]]; then
         else
             sed -i "s|WIFI_PASSPHRASE=.*|WIFI_PASSPHRASE=$WIFI_PASSPHRASE|g" $CONFIGURATION_FILE
         fi
+        if ! grep -q "WIFI_HOTSPOT=" $CONFIGURATION_FILE; then
+            echo "WIFI_HOTSPOT=$WIFI_HOTSPOT" >> $CONFIGURATION_FILE
+        else
+            sed -i "s|WIFI_HOTSPOT=.*|WIFI_HOTSPOT=$WIFI_HOTSPOT|g" $CONFIGURATION_FILE
+        fi
         
-        systemctl restart networking
+        systemctl restart network-manager
     fi  
 }
 

src/freedombone-wifi

 WIFI_TYPE='wpa2-psk'
 WIFI_SSID=
 WIFI_PASSPHRASE=
+WIFI_HOTSPOT='no'
 
 function wifi_get_psk {
     ssid=$1
     echo $psk
 }
 
+function hotspot_off {
+    if [ ! -f /etc/hostapd/hostapd.conf ]; then
+        return
+    fi
+    systemctl stop hostapd
+
+    rm /etc/hostapd/hostapd.conf
+
+    if [ -f /etc/network/interfaces_old ]; then
+        cp /etc/network/interfaces_old /etc/network/interfaces
+    else
+        echo '# interfaces(5) file used by ifup(8) and ifdown(8)' > /etc/network/interfaces
+        echo '# Include files from /etc/network/interfaces.d:' >> /etc/network/interfaces
+        echo 'source-directory /etc/network/interfaces.d' >> /etc/network/interfaces
+    fi
+    
+    systemctl restart network-manager
+}
+
+function hotspot_on {
+    if [ ! -f /etc/default/hostapd ]; then
+        echo $'/etc/default/hostapd was not found'
+        exit 67241
+    fi
+    if [ ${#WIFI_PASSPHRASE} -lt 8 ]; then
+        echo $'Wifi hotspot passphrase is too short'
+        exit 25719
+    fi
+    
+    sed -i 's|#DAEMON_CONF=.*|DAEMON_CONF="/etc/hostapd/hostapd.conf"|g' /etc/default/hostapd
+
+    echo '### Wireless network name ###' > /etc/hostapd/hostapd.conf
+    echo "interface=$WIFI_INTERFACE" >> /etc/hostapd/hostapd.conf
+    echo '' >> /etc/hostapd/hostapd.conf
+    echo '### Set your bridge name ###' >> /etc/hostapd/hostapd.conf
+    echo 'bridge=br0' >> /etc/hostapd/hostapd.conf
+    echo '' >> /etc/hostapd/hostapd.conf
+    echo 'driver=nl80211' >> /etc/hostapd/hostapd.conf
+    echo "country_code=UK" >> /etc/hostapd/hostapd.conf
+    echo "ssid=$WIFI_SSID" >> /etc/hostapd/hostapd.conf
+    echo 'hw_mode=g' >> /etc/hostapd/hostapd.conf
+    echo 'channel=6' >> /etc/hostapd/hostapd.conf
+    echo 'wpa=2' >> /etc/hostapd/hostapd.conf
+    echo "wpa_passphrase=$WIFI_PASSPHRASE" >> /etc/hostapd/hostapd.conf
+    echo '' >> /etc/hostapd/hostapd.conf
+    echo '## Key management algorithms ##' >> /etc/hostapd/hostapd.conf
+    echo 'wpa_key_mgmt=WPA-PSK' >> /etc/hostapd/hostapd.conf
+    echo '' >> /etc/hostapd/hostapd.conf
+    echo '## Set cipher suites (encryption algorithms) ##' >> /etc/hostapd/hostapd.conf
+    echo '## TKIP = Temporal Key Integrity Protocol' >> /etc/hostapd/hostapd.conf
+    echo '## CCMP = AES in Counter mode with CBC-MAC' >> /etc/hostapd/hostapd.conf
+    echo 'wpa_pairwise=TKIP' >> /etc/hostapd/hostapd.conf
+    echo 'rsn_pairwise=CCMP' >> /etc/hostapd/hostapd.conf
+    echo '' >> /etc/hostapd/hostapd.conf
+    echo '## Shared Key Authentication ##'
+    echo 'auth_algs=1'
+    echo '' >> /etc/hostapd/hostapd.conf
+    echo '## Accept all MAC address ###' >> /etc/hostapd/hostapd.conf
+    echo 'macaddr_acl=0' >> /etc/hostapd/hostapd.conf
+
+    if ! grep -q "# Hotspot" /etc/network/interfaces; then
+        cp /etc/network/interfaces /etc/network/interfaces_old
+    fi
+    
+    echo '# Hotspot' > /etc/network/interfaces
+    echo 'auto lo br0' >> /etc/network/interfaces
+    echo 'iface lo inet loopback' >> /etc/network/interfaces
+    echo '' >> /etc/network/interfaces
+    echo "# wireless $WIFI_INTERFACE" >> /etc/network/interfaces
+    echo "allow-hotplug $WIFI_INTERFACE" >> /etc/network/interfaces
+    echo "iface $WIFI_INTERFACE inet manual" >> /etc/network/interfaces
+    echo '' >> /etc/network/interfaces
+    echo '# eth0 connected to the ISP router' >> /etc/network/interfaces
+    echo 'allow-hotplug eth0' >> /etc/network/interfaces
+    echo 'iface eth0 inet manual' >> /etc/network/interfaces
+    echo '' >> /etc/network/interfaces
+    echo '# Setup bridge' >> /etc/network/interfaces
+    echo 'iface br0 inet static' >> /etc/network/interfaces
+    echo "    bridge_ports $WIFI_INTERFACE eth0" >> /etc/network/interfaces
+
+    systemctl restart network-manager
+    systemctl restart hostapd
+}
+
 function wifi_wpa2_psk {
     ssid=$1
     passphrase=$2
     echo $'  -t --type [wpa2-psk|none]        Security type'
     echo $'  -s --ssid [id]                   Set SSID'
     echo $'  -p --passphrase [text]           Set passphrase'
+    echo $'     --hotspot [yes|no]            Create a hotspot'
     echo ''
     exit 0
 }
             shift
             WIFI_PASSPHRASE=${1}            
             ;;
+        --hostpot)
+            shift
+            WIFI_HOTSPOT=${1}            
+            ;;
         *)
             # unknown option
             ;;
     exit 1
 fi
 
+if [[ $WIFI_HOTSPOT != 'no' ]]; then
+    hotspot_on
+    exit 0
+else
+    hotspot_off
+fi
+
 if [[ $WIFI_TYPE != 'none' ]]; then
     if [ ! $WIFI_PASSPHRASE ]; then
         echo $'No wifi passphrase was given'