Translations

locale/af/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/af/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/af/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/ar/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/ar/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/ar/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/be/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/be/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/be/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/bg/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/bg/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/bg/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/bs/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/bs/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/bs/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/ca/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/ca/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/ca/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/cs/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/cs/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/cs/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/da/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/da/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/da/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/de/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/de/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/de/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/de_du/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/de_du/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/de_du/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/el/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/el/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/el/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/en_us/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "Developer",
     "Mesh (router)": "Mesh (router)",
     "Mesh (user device)": "Mesh (user device)",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'",
     "Give your mesh peer a name": "Give your mesh peer a name",
     "Wifi Channel (spaced to be non-overlapping):": "Wifi Channel (spaced to be non-overlapping):",
     "Username": "Username",
@@ -189,6 +189,13 @@
     "ValiDOM": "ValiDOM",
     "Freie Unzensierte": "Freie Unzensierte",
     "Google": "Google",
+    "Wifi Settings": "Wifi Settings",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:",
+    "Interface:": "Interface:",
+    "SSID:": "SSID:",
+    "Type:": "Type:",
+    "Passphrase:": "Passphrase:",
+    "Hotspot:": "Hotspot:",
     "Choose Dynamic DNS provider:": "Choose Dynamic DNS provider:",
     "Dynamic DNS provider username": "Dynamic DNS provider username",
     "Dynamic DNS provider password": "Dynamic DNS provider password",

locale/en_us/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x",
     "Set the IP address of your internet router/modem": "Set the IP address of your internet router/modem",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar",
+    "Wifi Settings": "Wifi Settings",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:",
+    "Interface:": "Interface:",
+    "SSID:": "SSID:",
+    "Type:": "Type:",
+    "Passphrase:": "Passphrase:",
+    "Hotspot:": "Hotspot:",
+    "Wifi settings were changed": "Wifi settings were changed",
     "Backup and Restore": "Backup and Restore",
     "Choose an operation:": "Choose an operation:",
     "Backup data to USB drive": "Backup data to USB drive",

locale/en_us/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]"
+}

locale/es/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/es/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/es/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/et/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/et/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/et/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/eu/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/eu/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/eu/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/fa/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/fa/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/fa/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/fi/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/fi/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/fi/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/fil/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/fil/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/fil/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/fr/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/fr/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/fr/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/fr_ca/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/fr_ca/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/fr_ca/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/ga/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/ga/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/ga/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/gl/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/gl/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/gl/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/gu/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/gu/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/gu/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/he/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/he/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/he/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}

locale/hi/freedombone-config.json

@@ -108,7 +108,7 @@
     "Developer": "",
     "Mesh (router)": "",
     "Mesh (user device)": "",
-    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$ESSID'": "",
+    "Wireless Mesh ESSID\\n\\nIf you press enter the default will be '$WIFI_SSID'": "",
     "Give your mesh peer a name": "",
     "Wifi Channel (spaced to be non-overlapping):": "",
     "Username": "",
@@ -189,6 +189,13 @@
     "ValiDOM": "",
     "Freie Unzensierte": "",
     "Google": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
     "Choose Dynamic DNS provider:": "",
     "Dynamic DNS provider username": "",
     "Dynamic DNS provider password": "",

locale/hi/freedombone-controlpanel.json

@@ -166,6 +166,14 @@
     "In order to forward incoming internet traffic to this system most internet routers need to know a static local IP address to send the data to.\\n\\n\nEnter a static local IP address for this system.\\n\\nIt will typically be 192.168.1.x": "",
     "Set the IP address of your internet router/modem": "",
     "Set the local IP address for your internet router or ADSL modem.\\n\\nIt will typically be 192.168.1.1, 192.168.1.254, or similar": "",
+    "Wifi Settings": "",
+    "\\nIf you wish to use wifi and have a Free Software compatible adapter (eg. Atheros) rather than wired ethernet then enter the details below, otherwise just select Ok:": "",
+    "Interface:": "",
+    "SSID:": "",
+    "Type:": "",
+    "Passphrase:": "",
+    "Hotspot:": "",
+    "Wifi settings were changed": "",
     "Backup and Restore": "",
     "Choose an operation:": "",
     "Backup data to USB drive": "",

locale/hi/freedombone-wifi.json

@@ -0,0 +1,3 @@
+{
+    "${PROJECT_NAME}-wifi -i [interface] -t [type] -s [ssid] -p [passphrase]": ""
+}